|
 |
| New Developments |
mailing address
IMPACT Laboratory
University of Texas at Austin
Mechanical Engineering
1 University Station C2200
Austin, TX 78712-0292
physical address
IMPACT Laboratory
Engineering Teaching
Center
204 East Dean Keeton Street
Austin, TX 78705
student office
ETC 4.102
phone: (512)
471-6515
laboratory
ETC 6.104 |
|
|
 Publications
 JOURNALS
CONFERENCE, SYMPOSIA AND
WORKSHOPS PROCEEDINGS
BOOKS
AND BOOK CHAPTERS
TECHNICAL REPORTS
PRESENTATIONS AT TECHNICAL
MEETINGS
|
|
JOURNALS
Ananthakrishnan, R.,
Guck, J., Wottowah, F., Schinkinger, S., Lincoln, B., Romeyke,
M., Moon, T., Käs, J. “Quantifying the Contribution of Actin
Networks to the Elastic Strength of Fibroblasts,” Journal
of Theoretical Biology, Vol. 242, Issue 2, 21 September
2006, pp 502-516.
Bhalerao, M.S., Moon, T.J. and Schapery, R.A.,
“On the Internal Instability in Layered and Fiber Composites:
An Incremental Deformation Approach,” ASME Journal of Applied
Mechanics (in press).
Yee, K.–C. and Moon, T.J., “Process-Induced
Residual Stresses in a Continuously–Cured, Hoop–Wound Thermoset
Composite Cylinder, I: Theory,” Journal of
Composite Materials (in press).
Yee, K.–C. and Moon, T.J., “Process-Induced
Residual Stresses in a Continuously–Cured, Hoop–Wound Thermoset
Composite Cylinder, II: Validation,” Journal of
Composite Materials (in press).
Yee, K.–C. and Moon, T.J., “Process-Induced
Residual Stresses in a Continuously–Cured, Hoop–Wound Thermoset
Composite Cylinder, III: Processing Variable Study,” Journal
of Composite Materials (in press). |
2003
Kim, J., Moon, T.J. and Howell, J.R.,
“Transient Thermal Modeling of In-Situ Curing during Tape
Winding of Composite Cylinders,” ASME Journal of Heat
Transfer, Vol. 125, No. 1, pp. 137–146, 2003.
Yee, K.–C. and Moon, T.J., “Compressive
Strengths of In–Situ Cured Graphite/Epoxy and Glass/Epoxy
Composite Cylinders,” Journal of Reinforced
Plastics and Composites, Vol. 22, No. 2, pp. 131–147, 2003.
|
2002
Kim, J., Moon, T.J. and Howell, J.R., “Cure
Kinetic Model, Heat of Reaction, and Glass Transition
Temperature of AS4/3501–6 Graphite/Epoxy Prepregs,” Journal
of Composite Materials, Vol. 36, No. 21, pp. 2479–2498,
2002.
Chern, B.–C., Moon, T.J., Howell, J.R. and
Tan, W. “New Experimental Data for Enthalpy of Reaction,
Specific Heat and Thermal Conductivity of Hercules 3501–6 Epoxy
Resin System,” Journal of Composite Materials, Vol. 36,
No. 17, pp. 2061–2072, 2002.
Chern, B.–C., Moon, T.J. and Howell, J.R.
“On-Line Processing of Unidirectional Fiber Composites Using
Radiative Heating: I. Model,” Journal of Composite Materials,
Vol. 36, No. 16, pp. 1905–1934, 2002.
Chern, B.–C., Moon, T.J. and Howell, J.R.
“On-Line Processing of Unidirectional Fiber Composites Using
Radiative Heating: II. Radiative Properties, Experimental
Validation and Process Parameter Selection,” Journal of
Composite Materials, Vol. 36, No. 16, pp. 1935–1965, 2002.
Yee, K.–C. and Moon, T.J., “Plane Thermal
Stress Analysis of an Orthotropic Cylinder Subject to an
Arbitrary, Transient, Asymmetric Temperature Distribution,” ASME
Journal of Applied Mechanics, Vol. 69, September, pp.
632–640, 2002.
Kugler, D. and Moon, T.J., “The Effects of
Mandrel Material and Tow Tension on Defects and Compressive
Strength of Hoop-Wound, On-Line Consolidated, Composite Rings,”
Composites. Part A: Applied Science and
Manufacturing, Vol. 33, No. 6, pp. 861–876, 2002.
Kugler, D. and Moon, T.J., “Identification of
the Most Significant Processing Parameters on the Development of
Fiber Waviness in Thin Laminates,” Journal of Composite
Materials, Vol. 36, No. 12, pp. 1451–1479, 2002.
Joyce, P.J., Violette, M.G. and Moon, T.J.
“Finite Element Analysis of Unidirectional Composite Compression
Test Specimens: A Parametric Study,” Composite Materials:
Testing, Design and Acceptance Criteria, ASTM STP 1416,
A.T. Nettles and A. Zureick, Eds., American Society of Testing
and Materials, West Conshohocken, PA, pp. 30–68, 2002.
Kugler, D. and Moon, T.J., “A Technique for
Compression Testing of Composite Rings,” Composites. Part A:
Applied Science and Manufacturing, Vol. 33, No. 4,
pp. 507–514, 2002.
|
2001
Guck, J., Ananthakrishnan, R., Mahmood, H.,
Moon, T.J., Cunningham, C.C. and Käs, J., ”The Optical
Stretcher—A Novel Laser Tool to Micromanipulate Cells,”
Biophysical Journal, Vol. 81, No. 2, pp. 767–784, 2001.
|
2000
Guck, J., Ananthakrishnan, R.,
Moon, T.J., Cunningham, C.C. and Käs, J., “Optical
Deformability of Soft Biological Dielectrics” Physical
Review Letters, Vol. 84, No. 23, pp. 5451–5454, June 5,
2000.
|
Pre 2000
Joyce, P. J. and Moon, T. J., “Compression
Strength Reduction in Composites with In–Plane Fiber
Waviness,” Composite Materials: Fatigue and Fracture,
Seventh Volume, ASTM STP 1330, R. B. Bucinell, Ed.,
American Society for Testing and Materials, pp. 76–96,
1998.
Joyce, P.J., Kugler, D. and Moon, T.J., “A
Technique for Characterizing Process–Induced Fiber Waviness in
Composite Laminates Using Optical Microscopy,” Journal of
Composite Materials, Vol. 31, No. 17, pp. 1694–1727,
July 1997.
Kugler, D., Joyce, P.J. and Moon, T.J.,
“Investigation of the Effect of Part Length on Process–Induced
Fiber–Wrinkled Regions in Composite Laminates,” Journal of
Composite Materials, Vol. 31, No. 17, pp. 1728–1757, July
1997.
Bhalerao, M. S. and Moon, T. J., “On the
Growth–of–Waviness in Fiber–Reinforced Polymer Composites:
Viscoelastic Bifurcation and Imperfection Sensitivity,” ASME
Journal of Applied Mechanics, Vol. 63, pp. 460–466, 1996.
Bhalerao, M. S. and Moon, T. J.,
“Micromechanics of Local Viscoelastic Buckling in Thick
Composites,” Composites Part B, Vol. 27B, pp. 561–568,
1996.
Chern, B.–C., Moon, T.J. and Howell, J.R.,
“Thermal Analysis of In–Situ Curing for Thermoset, Hoop–Wound
Structures Using Infrared Heating: Part I—Predictions Assuming
Independent Scattering,” ASME Journal of Heat Transfer,
Vol. 117, No. 3, pp. 674–680, 1995.
Chern, B.–C., Moon, T.J. and Howell, J.R.,
“Thermal Analysis of In–Situ Curing for Thermoset, Hoop–Wound
Structures Using Infrared Heating: Part II—Dependent Scattering
Effect,” ASME Journal of Heat Transfer,
Vol. 117, No. 3, pp. 681–686, 1995.
Lee, F.–S., Moon, T.J. and Masada, G.Y.,
“Extended Bond Graph Reticulation of Piezoelectric Continua,”
ASME Journal of Dynamic Systems, Measurement and Control,
Vol. 117, No. 1, pp. 1–7, 1995.
Lee, F.–S., Moon, T.J. and Masada, G.Y.,
“Modeling of Distributed Electromechanical Continua Using
Extended Bond Graphs,” Journal of the Franklin Institute,
Vol. 331B, No. 1, pp. 43–60, 1994.
Lee , F.–S., Moon, T.J. and Masada, G.Y., “Extended Bond
Graph Reticulation of Magnetostrictive Continua,” Journal of
Applied Physics, Vol. 75, No. 9, pp. 4621–4627, 1994.
Chern, B.–C., Moon, T.J. and Howell, J.R., “Modeling of
Radiation–Initiated Cure–on–the–Fly of Epoxy–Matrix Composite
Cylinders,” Journal of Materials Processing and Manufacturing,
Vol. 2, No. 4, pp. 373–390, 1994.
Ma, N., Moon , T.J. and Walker, J.S., “Electromagnetic Pump
with Thin Metal Walls,” ASME Journal of Fluids Engineering, Vol.
116, No. 2, pp. 298–302, 1994.
Ma, N., Walker, J.S., Moon, T.J., Hua, T.Q. and Picologlou,
B.F., “Electromagnetic Control of Flow Distribution Between
Parallel Ducts of Liquid–Metal–Cooled Blankets,” Fusion
Technology, Vol. 25, No. 4, pp. 398–410, 1994.
Chern, B.–C., Moon, T.J. and Howell, J.R., “Measurement of
the Temperature– and Cure–Dependence of the Thermal Conductivity
of Epoxy Resin,” Experimental Heat Transfer, Vol. 6, pp.
157–174, 1993.
Moon, T.J., Hua, T.Q., Walker, J.S. and Picologlou, B.F.,
“Liquid Metal Flow in a Simple Manifold with a Strong Transverse
Magnetic Field,” Applied Scientific Research, Vol. 49, pp.
49–65, 1992.
Moon, T.J., Hua, T.Q. and Walker, J.S. “Liquid Metal Flow in
a Backward Elbow in the Plane of a Strong Magnetic Field,”
Journal of Fluid Mechanics, Vol. 227, pp. 273–291, 1991.
Ting, A.L., Walker, J.S., Moon, T.J., Reed, C.B. and
Picologlou, B.F., “Linear Stability Analysis for High–Velocity
Boundary Layers in Liquid–Metal Magnetohydrodynamic Flows,”
International Journal of Engineering Science, Vol. 29, No. 8,
pp. 939–948, 1991.
Ting, A.L., Walker, J.S., Moon, T.J., Reed, C.B. and
Picologlou, B.F., “Linear Stability Results for High–Velocity
Boundary Layers in Self–Cooled Liquid Metal Tokamak Blankets,”
Fusion Technology, Vol. 19, pp. 1036–1039, 1991.
Moon, T.J. and Walker, J.S., “Liquid Metal Flow Through a
Sharp Elbow in the Plane of a Strong Magnetic Field,” Journal of
Fluid Mechanics, Vol. 213, pp. 397–418, 1990.
Moon, T.J. and Walker, J.S., “Liquid Metal Flow in a
Large–Radius Elbow with a Uniform Magnetic Field,” Journal de
Mécanique théorique et appliquée, Vol. 7, No. 4, pp. 443–459,
1988.
|
|
CONFERENCE, SYMPOSIA AND
WORKSHOPS PROCEEDINGS
Lao, S.C., Hadisujoto, B.S., Yong, W.Y, Jor, H.K., Wu, C.,
Moon, T.J., Koo, J.H., Pilato, L.A., and Wissler, G.E.,
“Polyamide 11-Alumina Nanocomposites: A Preliminary
Investigation,” American Chemical Society Meeting, Symposium
of the Division of Polymeric Materials: Science and
Engineering, New Orleans, LA, April 6-10, 2008.
Kim, D., Mawer, A., Moon, T. and Masada, G., “Modeling and
Analysis of Crack Growth in SnPb and SnAg Solder Joints in PBGA
Packages: Part 2—Crack Propagation,” ASME International
Mechanical Engineering Conference and Exposition, Washington DC,
November 2003.
Kim, D., Mawer, A., Moon, T. and Masada, G., “Modeling and
Analysis of Crack Growth in SnP:b and SnAg Solder Joints in PBGA
Packages: Part 1—Crack Initiation,” ASME International
Mechanical Engineering Conference and Exposition, Washington DC,
November 2003.
Kim, D., Mawer, A., Moon, T. and Masada, G., “Life Prediction
of SnPb and SnAg Solder Joints in PBBA Packages using a Severity
Metric,” Proceedings of the Pacific Rim/ASME International
Electronics Packaging (IPACK’03) Conference, Maui HI, July 6-11,
2003, paper 35303.
Park, C., Dias-Filho, J., Kim, D., Mawer, A., Masada, G. and
Moon, T., “Crack Area Analysis of SnPb and SnAg Solder Joints in
Plastic Ball Grid Array Packages from Dye Penetration Studies,”
Proceedings of the Pacific Rim/ASME International Electronics
Packaging (IPACK’03) Conference, Maui HI, July 6-11, 2003, paper
35028.
Kim, D., Dias-Filho, J., Park, C., Mawer, A., Moon, T. and
Masada, G., “Crack Length Analysis of SnPb and SnAg Solder
Joints in Plastic Ball Grid Array Packages from Dye Penetration
Studies,” Proceedings of the 53rd Electronic Components
Technology Conference, New Orleans LA, June 2003, pp. 1746-1753.
Chan, V., Bless, S., Berry, D., Satapathy, S., and Moon, T.,
“Resistance of Dynamic Fracture of Tungsten Alloys Determined by
a New Test Technique,” Proceedings of the 18th International
Symposium and Exhibition on Ballistics, San Antonio, TX,
November 15-19, 1999.
Hudson, R.S. and Moon, T.J., “Homopolar Welding for J–Lay
Applications: Recent Process Improvements,” Heat Transfer
Symposium, Energy Week ‘97: The Energy–Sources Technology
Conference & Exhibition, Houston, TX, January 28-30, 1997.
Kim, J., Moon, T. J. and Howell, J. R., “Thermal Analysis and
Process Window Development for the In-Situ Curing of Thermoset
Composites,” Proceedings of the 1996 31st ASME National Heat
Transfer Conference. Part 1 (of 8), Houston, TX, August 3-6,
1996, pp. 255-261.
Bhalerao, M. S. and Moon, T. J. “Instability in Layered Media
in the Context of Fiber Waviness in Unidirectional Composites,”
Proceedings of the 1996 ASME International Mechanical
Engineering Congress & Exhibition, Atlanta, GA, Nov 17-22 1996,
14p.
Kim, J., Moon, T. J. and Howell, J. R., “Effects of Process
Variables on In-Situ Curing for Thick Composites Using Infrared
Heating,” Proceedings of the 1996 ASME International Mechanical
Engineering Congress & Exhibition, Atlanta, GA, Nov 17-22 1996,
14p.
Yee, K.–C., and Moon, T. J., “Stress Analysis of an
Orthotropic Right Circular Cylinder Subject to Arbitrary
External Loading,” Proceedings of the 1996 ASME International
Mechanical Engineering Congress & Exhibition, Atlanta, GA, Nov
17-22 1996, 17p.
Hudson, R.S. and Moon, T.J., “Homopolar Pulse Welding (HPW)
of HSLA Linepipe for Deepwater J-LAY Applications,” Energy Week
‘96, The Energy–Sources Technology Conference & Exhibition, API
and ASME, Houston, TX, January 30–February 1, 1996.
Bhalerao, M.S. and Moon, T.J., “Stability of Nonhomogeneous
Continua: Incremental Deformation Approach,” Proceedings of the
32nd Annual Technical Meeting of Society of Engineering Science,
New Orleans, LA, October 29–November 1, 1995.
Bhalerao, M.S. and Moon, T.J., “Micromechanics of Local
Viscoelastic Buckling in Thick Composites,” Proceedings of the
Second International Conference on Composites Engineering, ICCE/2,
New Orleans, LA, August 21–24, 1995.
Bhalerao, M.S. and Moon, T.J., ‘‘A Strongly Converging
Numerical Procedure Based on the Bisection Method for Evaluation
of the Critical Load and Wavelength of a Multilayered Medium,’’
Proceedings of the Third U.S. National Congress of Computational
Mechanics, Dallas, TX, June 14, 1995, pp. 338.
Chern, B.–C., Moon, T.J. and Howell, J.R., “Dependent
Radiative Transfer Regime for Unidirectional Fiber Reinforced
Composites Upon Normal Incident Radiation,” Proceedings of the
4th ASME/JSME Thermal Engineering Joint Conference 1995, Maui,
HI, March 19–24, 1995, pp. 267-272.
Bhalerao, M.S. and Moon, T.J., “Imperfection Sensitivity and
Growth–of–Waviness in Laminated Composites,” ASME International
Mechanical Engineering Congress and Exhibition, ASME AMD–Vol.
194, Mechanics of Materials Processing and Manufacturing 1994,
Chicago, IL, November 6–11, 1994, pp. 361–385.
Chern, B.–C., Moon, T.J. and Howell, J.R.,
“Angle–of–Incidence Dependent Scattering Effects in Arrays of
Parallel Cylinders Typical of Filament–Wound Composites,” 6th
AIAA/ASME Thermophysics and Heat Transfer Conference, ASME HTD–Vol.
276 Radiative Heat Transfer: Current Research, Colorado Springs,
CO, June 20–23, 1994, pp. 79–90.
Chern, B.–C., Howell, J.R. and Moon, T.J. “Dependent
Scattering Effects on Wave Propagation Through Filament–Wound
Composites,” 6th AIAA/ASME Thermophysics and Heat Transfer
Conference, ASME HTD–Vol. 276 Radiative Heat Transfer: Current
Research, Colorado Springs, CO, June 20–23, 1994, pp. 15–20.
Portillo, D.E. and Moon, T.J., “Modeling of Radiation in
Gas–Shielded Arc Welding by the Zonal Method,” ASME Winter
Annual Meeting, ASME PED–Vol. 64 Manufacturing Science and
Engineering, New Orleans, LA, November 28–December 3, 1993, pp.
879–884.
Chern, B.–C., Moon, T.J. and Howell, J.R., “Assessment of
Using In–Situ IR–Heat to Cure Thermoset, Filament–Wound
Structures,” Proceedings of the First International Conference
on Transport Phenomena in Processing, Honolulu, HI, March 22–26,
1992, pp. 1303–1313.
Ma, N., Moon, T.J. and Walker, J.S., “Electromagnetic Pump
with Thin Metal Walls,” 1992 ASME Winter Annual Meeting,
92–WA/AES–2, Anaheim, CA, November 9–13, 1992.
Khatiblou, E.A., Liu, C.C., Kreuzer, S.M. and Moon, T.J.,
“Statistical Modeling of Actin Crosslinking in Networks and
Bundles,” Proceedings of the 52nd Annual Biophysical Meeting,
Biophysical Society, Long Beach, CA, February 2-6, 2008.
Lao, S.C., Koo, J.H., Morgan, A., Yong, W., Tower, C., Jor,
H., Moon, T.J., Wissler, G., Pilato, L., and Luo, Z.P., "Intumescent
Flame Retardant Polyamide 11 Nanocomposites," Proceedings of the
18th Annual Solid Freeform Fabrication Symposium, Austin, TX,
August 6-8, 2007, pp. 324-339.
Liu, C.C., Kreuzer, S.M., Khatiblou, E.A. and Moon, T.J.,
“Statistical Modeling of the Self-Assembly of Stress Fibers,”
Proceedings of the 51st Annual Biophysical Meeting, Biophysical
Society, Baltimore, MD, March 3-7, 2007.
Liu, C.C. and Moon, T.J., “Statistical Micromechanics Model
of Stress Fiber Assembly,” Proceedings of the 50th Annual
Biophysical Meeting, Biophysical Society, Salt Lake City, UT,
February 18-22, 2006.
Liu, C.C. and Moon, T.J., “Micromechanical Model of Stress
Fiber Contraction,” Proceedings of the 49th Annual Biophysical
Meeting, Biophysical Society, Long Beach, CA, February 12-16,
2005.
Liu, C., Diaz-Aguado, M.F., Landi, D.B. and Moon, T.J.,
“Micromechanics Applied to Cytoskeleton Dynamics: Actin
Substructure Modeling,” Proceedings of the 48th Annual
Biophysical Meeting, Biophysical Society, Baltimore, MD,
February 14-18, 2004.
Chern, B.–C., Moon, T.J. and Howell, J.R., “Electromagnetic
Propagation & Radiative Transport in Fiberous Composites:
Dependent Scattering Effects,” Proceedings of the 17th Annual
Technical Conference, American Society for Composites. Purdue
University, West Lafayette, IN, October 21-23, 2002.
Fuentes, L., Verhulst, S., Jirsa, J. O., Fowler, D. W.,
Wheat, H. G. and Moon, T. J. “The Use of Composite Wrapping on
Reinforced Concrete Structures,” Corrosion 2000, Paper No. 820,
NACE International, Houston, TX, 2000.
Hudson, R. S., Carnes, R.W. Jr., and Moon, T.J. “Homopolar
Welding for J–Lay Applications: Recent Process Improvements,”
77th Annual AWS Convention and International Welding &
Fabrication Exposition, Chicago, IL, April 22–25, 1996; received
Best Student Paper award.
Moon, T.J., Bhalerao, M.S., Joyce, P.J. and Kugler, D.,
“Polymer Composite Processing: Models and Experiments,”
Proceedings of the 1995 NSF Design and Manufacturing Grantees
Conference, San Diego, CA, January 4–6, 1995.
Joyce, P.J., Kugler, D. and Moon, T.J., ‘‘Investigation of
Process–Induced Fiber–Wrinkled Regions in Composite Laminates,’’
Proceedings of the 31st Annual Technical Meeting of Society of
Engineering Science, College Station, TX, October 10–12, 1994.
Bhalerao, M.S. and Moon, T.J., ‘‘Review of Modeling
Techniques for Process–Induced Waviness in Composite
Laminates,’’ Proceedings of the 31st Annual Technical Meeting of
Society of Engineering Science, College Station, TX, October
10–12, 1994.
Moon, T.J., “Modeling and Control of Manufacturing
Processes,” Proceedings of the 1994 NSF Design and Manufacturing
Grantees Conference, pp. 617–618, Cambridge, MA, January 5–7,
1994.
Chern, B.–C., Moon, T.J. and Howell, J.R., “Dependent
Scattering and Oblique Incidence Effects on the Radiation Heat
Transfer Through Closely–Packed, Aligned, Parallel Cylinders,”
NSF Workshop: Radiation Heat Transfer in Highly Coupled Physical
Systems, The University of Texas at Austin, October 4–8, 1993.
|
|
BOOKS
AND BOOK CHAPTERS
Transport Phenomena in Materials Processing, ed. Prescott,
P.J. Jacobs, H.R., Seyed-Yagoobi, J., Pulkowski, J.,
Grigoropoulos, C.P., Moon, T.J., Lavine, A.S., Oosthuizen, P.H.
and Bayazitoglu, Y., ASME Heat Transfer Division HTD–Vol.
317-2, 1995, Proc. of the 1995 ASME International Mechanical
Engineering Congress and Exposition. Part 2 (of 2), Nov 12-17
1995, San Francisco, CA, USA, p 321.
Mechanics of Materials Processing and Manufacturing 1994, ed.
T. Moon and M. Ghasemi Nejhad, ASME AMD–Vol. 194, ASME
International Mechanical Engineering Congress and Exhibition,
Chicago, IL, November 6–11, 1994.
Transport Phenomena in Manufacturing and Materials
Processing, ed. M.K. Alam, C.P. Grigoropoulos, Y. Joshi, M.V.
Karwe, A.S. Lavine, T. Moon and R.N. Smith, ASME HTD–Vol. 280,
6th AIAA/ASME Thermophysics and Heat Transfer Conference,
Colorado Springs, CO, June 20–23, 1994.
Heat and Mass Transfer in Materials Processing and
Manufacturing, ed. D.A. Zumbrunnen, J. Seyed–Yagoobi, V. Prasad,
M. Charmchi, A.G. Lavine, M.K. Moallemi, N.A. Hussain, and T.
Moon, ASME HTD–Vol. 261, ASME Winter Annual Meeting, New
Orleans, LA, November 28–December 3, 1993.
Liquid Metal Flow in a Sharp Elbow in a Uniform Transverse
Magnetic Field, Moon, T.J., Ph.D. Thesis, Department of
Theoretical & Applied Mechanics, University of Illinois at
Urbana, 1989.
|
|
TECHNICAL REPORTS
Zapata, N., Moon, T.J. and Liu, C.C., “Modeling of Cell
Motility using Matlab,” 2007 Summer Research Academy, Louis
Stokes Alliance for Minority Participation (LSAMP) for the
University of Texas System, Austin, Texas, August 2007.
Moon, T.J., National Science Foundation, POWRE Program,
BES-9973608 “Mechanics of Biological Cell and Cell-Cell
Interactions: Microstructural Models” Final Report, July 2007.
Moon, T.J., National Science Foundation, 1992 Young
Investigator Award, Division of Design & Manufacturing Systems,
DDM–9258413 “Modeling and Control of Manufacturing Processes”
Final Report, February 2007.
Khatiblou, E.A., Liu, C. C., and Moon, T.J., “A Comparison
between Stress Fibers and Muscles,” IMPACT Laboratory Research
Report, Department of Mechanical Engineering, The University of
Texas at Austin, June 2005; https://webspace.utexas.edu/moontj/IMPACT/.
Moon, T.J., “Towards Early Cancer Detection: A Novel
Functionally–Integrated Cytoskeleton Model,” Texas Advanced
Research Program ARP 003658-0523 Final Report, October 2004.
Liu, C.C. and Moon, T.J., “Biological Understanding of Stress
Fibers,” IMPACT Laboratory Research Report, Department of
Mechanical Engineering, The University of Texas at Austin,
September 2004; https://webspace.utexas.edu/moontj/IMPACT/.
Liu, C.C. and Moon, T.J., “Quantitative and Qualitative
Understanding of the Actomyosin Cross–Bridge and Molecular
Proteins,” IMPACT Laboratory Research Report, Department of
Mechanical Engineering, The University of Texas at Austin,
August 2004; https://webspace.utexas.edu/moontj/IMPACT/.
Landi, D.B., Liu, C.C., and Moon, T.J., "A Description of
Myosin-Dependent Adhesion, Fibroblast Motility, and How
Cytoskeleton Modeling Might Proceed to Abate the Course of
Disease,” IMPACT Laboratory Research Report, Department of
Mechanical Engineering, The University of Texas at Austin, April
2004; https://webspace.utexas.edu/moontj/IMPACT/.
Moon, T.J. and Sujanto, A.S., “Inspecting FRP Composite
Structures with Nondestructive Testing: Research Report
2—Results of Tasks 4, 5, 7, 9 and 10” Texas Department of
Transportation Project No. 0–1892, August 2002.
Fowler, T.J., Kinra, V.K., Maslav, K. and Moon, T.J.,
“Inspecting FRP Composite Structures with Nondestructive
Testing” Federal Highway Administration, Report No. FHWA/TX–03/1892-1,
October 2001.
Fowler, T.J., Kinra, V.K., Maslav, K. and Moon, T.J.,
“Inspecting FRP Composite Structures with Nondestructive
Testing: Research Report 1—Results of Tasks 1, 2 and 3” Texas
Department of Transportation Project No. 0–1892, October 2001.
Berver, E.W., Jirsa, J.O., Fowler, D.W., Wheat, H.G. and
Moon, T.J., “Effects of Wrapping Chloride-Contaminated Concrete
with Fiber Reinforced Plastics,” Federal Highway Administration,
Report No. FHWA/TX-0-1774-2, October 2001.
Verhulst, S.M., Fuentes, L.A., Jirsa, J.O., Fowler, D.W.,
Wheat, H.G. and Moon, T.J., “Evaluation and Performance
Monitoring of Corrosion Protection by Fiber-Reinforced Composite
Wrapping,” Federal Highway Administration, Report No. FHWA/TX–0–1774-1,
January 2001.
Moon, T.J., “Modeling Liquid Metal Duct Flows Using a Hybrid
Numerical–Analytical Scheme,” Final Report DOE–ANL 01622401,
September 1990.
|
|
PRESENTATIONS AT TECHNICAL
MEETINGS
Khatiblou, E.A, Liu, C.C., Kreuzer, S.M., Marquez, J.M. and
Moon, T.J., “Statistical Modeling of Actin Bundles and
Networks with Alpha-actinin Crosslinkers,” Graduate
Engineering Council and Graduate And Industry Networking
(GAIN) 2008 Conference, The University of Texas at Austin,
Austin, Texas, February 13, 2008; received Shell Research
Award for the “Best Paper & Presentation in Computation &
Simulation, Signal Processing and System Control.”
Lao, S.C., Koo, J.H., Moon, T.J., Yong, W., Wu, C., Wissler,
G., Pilato, L., and Luo, Z.P., “Flame Retardant Intumescent
Polyamide 11 Nanocomposites,” (poster) Graduate Engineering
Council and Graduate And Industry Networking (GAIN) 2008
Conference, The University of Texas at Austin, Austin, Texas,
February 13, 2008.
Khatiblou, E.A., Liu, C.C., Kreuzer, S.M. and Moon, T.J.,
“Statistical Modeling of Actin Crosslinking in Networks and
Bundles,” (poster) Graduate Engineering Council and Graduate And
Industry Networking (GAIN) 2008 Conference, The University of
Texas at Austin, Austin, Texas, February 13, 2008.
Khatiblou, E.A., Liu, C.C., Kreuzer, S.M. and Moon, T.J.,
“Statistical Modeling of Actin Crosslinking in Networks and
Bundles,” (poster) Proceedings of the 52nd Annual Biophysical
Meeting, Biophysical Society, Long Beach, CA, February 2-6,
2008.
Zapata, N., Moon, T.J. and Liu, C.C., “Modeling of Cell
Motility using Matlab,” Proceedings of the 2007 Summer Research
Academy, Louis Stokes Alliance for Minority Participation (LSAMP)
for the University of Texas System, The University of Texas at
Austin, Austin, Texas, August 3, 2007.
Lao, S., Yong, W., Tower, C., Jor, H. , Wu, C., Nguyen, K.,
Moon, T., Koo, J.H., Pilato, L., Wissler, G., and Ervin, M. ,
“Polyamide 11-Alumina Nanocomposites,” 18th Annual Solid
Freeform Fabrication Symposium, Austin, TX, August 6-8, 2007.
Liu, C.C., Kreuzer, S.M., Khatiblou, E.A and Moon, T.J.,
“Statistical Modeling the Self–Assembly of Stress Fibers,”
(poster), Proceedings of the 51th Annual Biophysical Meeting,
Biophysical Society, Baltimore, MD, March 3-7, 2007.
Liu, C.C., Kreuzer, S.M., Khatiblou, E.A and Moon, T.J., “A
Statistical Micromechanics Simulation Platform Designed to Study
the Dynamics of Self-Assembly of Cytoskeletal Substructures,”
Graduate Engineering Council and Graduate And Industry
Networking (GAIN) 2007 Conference, The University of Texas at
Austin, Austin, Texas, February 21, 2007.
Liu, C.C. and Moon, T.J., “Statistical Micromechanics Model
of Stress Fiber Assembly,” (poster), Proceedings of the 50th
Annual Biophysical Meeting, Biophysical Society, Salt Lake City,
UT, February 18-22, 2006.
Liu, C.C., Khatiblou, E. A. and Moon, T.J., “Towards a
Micromechanical Model of Stress Fiber Contraction,” (poster),
Engineering Student Research Conference, Graduate Engineering
Council, The University of Texas at Austin, Austin, Texas, April
28, 2005.
Liu, C.C. and Moon, T.J., “Micromechanical Model of Stress
Fiber Contraction,” (poster), Proceedings of the 49th Annual
Biophysical Meeting, Long Beach, CA, February 12-16, 2005.
Liu, C., Diaz-Aguado, M.F., Landi, D.B. and Moon, T.J.,
“Micromechanics Applied to Cytoskeleton Dynamics: Actin
Substructure Modeling,” (poster), Proceedings of the 48th Annual
Biophysical Meeting, Baltimore, MD, February 14-18, 2004.
Kim, D., Mawer, A., Moon, T. and Masada, G., “Modeling and
Analysis of Crack Growth in SnPb and SnAg Solder Joints in PBGA
Packages: Part 2—Crack Propagation,” ASME International
Mechanical Engineering Conference and Exposition, Washington,
DC, November 2003.
Kim, D., Mawer, A., Moon, T. and Masada, G., “Modeling and
Analysis of Crack Growth in SnP:b and SnAg Solder Joints in PBGA
Packages: Part 1—Crack Initiation,” ASME International
Mechanical Engineering Conference and Exposition, Washington,
DC, November 2003.
Masada, G. and Moon, T., “Lead-Free Solder: Some Experimental
Observations,” SMTA/IMAPS Central Texas Chapter Technical
Symposium, Austin, TX, September 15, 2003.
Kim, D., Mawer, A., Moon, T. and Masada, G., “Life Prediction
of SnPb and SnAg Solder Joints in PBBA Packages using a Severity
Metric,” Proceedings of the Pacific Rim/ASME International
Electronics Packaging (IPACK’03) Conference, Maui HI, July 6-11,
2003.
Park, C., Dias-Filho, J., Kim, D., Mawer, A., Masada, G. and
Moon, T., “Crack Area Analysis of SnPb and SnAg Solder Joints in
Plastic Ball Grid Array Packages from Dye Penetration Studies,”
Proceedings of the Pacific Rim/ASME International Electronics
Packaging (IPACK’03) Conference, Maui HI, July 6-11, 2003.
Kim, D., Dias-Filho, J., Park, C., Mawer, A., Moon, T. and
Masada, G., “Crack Length Analysis of SnPb and SnAg Solder
Joints in Plastic Ball Grid Array Packages from Dye Penetration
Studies,” Proceedings of the 53rd Electronic Components
Technology Conference, New Orleans LA, June 2003.
Ananthakrishnan, R., Guck, J., Moon, T.J. and Käs, J., ”The
Role of Actin Networks in Eukaryotic Cells,” Proceedings of the
American Physical Society March Meeting, Austin, TX, March 5,
2003.
Ananthakrishnan, R., Guck, J., Moon, T.J. and Käs, J., ”The
Role of Actin Networks in Eukaryotic Cells,” (poster),
Proceedings of the 47th Annual Biophysical Society Meeting, San
Antonio, TX, March 4, 2003.
Schinkinger, S., Wottawah, F., Lincoln, B., Ananthakrishnan,
R., Moon, T.J., Guck, J. and Käs, J., ”The Viscoelasticity of
the Cytoskeleton,” (poster), Proceedings of the 47th Annual
Biophysical Society Meeting, San Antonio, TX, March 4, 2003.
Ananthakrishnan, R., Guck, J., Moon, T.J. and Käs, J., ”The
Role of Actin Networks in the Structural Response of Cells,”
(poster), 1st Leipzig Research Festival for Life Sciences,
Leipzig, Germany, October 18, 2002.
Lincoln, B., Schinkinger, S., Wottawah, F., Ananthakrishnan,
R., Travis, K., Moon, T.J. and Guck, J., ”Optical Deformability
as a Novel Cell Marker,” (poster), Annual Meeting of the German
Biophysical Society, Dresden, Germany, September 8-10, 2002.
Schinkinger, S., Wottawah, F., Lincoln, B., Ananthakrishnan,
R., Moon, T.J., Käs, J. and Guck, J., ”Optical Microrheology on
Whole Cells,” (poster), Annual Meeting of the German Biophysical
Society, Dresden, Germany, September 8-10, 2002.
Ananthakrishnan, R., Guck, J., Moon, T.J. and Käs, J., ”The
Role of Actin Networks in the Structural Response of Cells,”
(poster), Annual Meeting of the German Biophysical Society,
Dresden, Germany, September 8-10, 2002.
Moon, T.J., “On the Biomechanics of Cells and Tissues,” BME
Center and Department Retreat, Houston Marriott Medical Center,
Houston, TX, December 11, 2001.
Joyce, P.J., Violette, M.G. and Moon, T.J., “Finite Element
Analysis of Unidirectional Composite Compression Test Specimens:
A Parametric Study,” ASTM Symposium on Composite Materials:
Testing, Design, and Acceptance Criteria, Phoenix, AZ, March
26–27, 2001.
Ananthakrishnan, R., Guck, J., Käs, J. and Moon, T.J., ”Cell
Elasticity: Towards the Structural Characterization of
Eukaryotic Cells,” (poster), First International Symposium on
Computational Cell Biology, Lenox, MA, March 4-6, 2001.
Ananthakrishnan, R., Guck, J., Käs, J. and Moon, T.J., ”The
Structural Response of Eukaryotic Cells,” (poster), Nonlinear
Dynamics and Pattern Formation Conference, Austin, TX, June 4-6
2000.
Chan, V., Bless, S., Berry, D., Satapathy, S., and Moon, T.,
“Resistance of Dynamic Fracture of Tungsten Alloys Determined by
a New Test Technique,” 18th International Symposium and
Exhibition on Ballistics, San Antonio, TX, November 15-19, 1999.
Joyce, P.J. and Moon, T.J., “The Role of Fiber Waviness and
Fiber Stiffness in Composite Compressive Failure,” (poster),
Gordon Research Conference on Composites, Ventura CA, January
10-15, 1999.
Yee, K.–C. and Moon, T.J., “In-Situ Cured Thermoset Composite
Cylinders: Residual Stresses and Compressive Strength,”
(poster), Gordon Research Conference on Composites, Ventura CA,
January 10-15, 1999.
Moon, T.J., “Defect Evolution & Effect in Thick-Section
Composite Laminates & Cylinders,” ONR Mechanics of Composites
Program Review, Arlington, VA, July, 1997.
Joyce, P. J. and Moon, T. J., “Compression Strength Reduction
in Composites with In–Plane Fiber Waviness,” 7th Symposium on
Composites: Fatigue and Fracture, St. Louis, MO, May 7–8, 1997.
Hudson, R.S. and Moon, T.J., “Homopolar Welding for J–Lay
Applications: Recent Process Improvements,” Heat Transfer
Symposium, Energy Week ‘97: The Energy–Sources Technology
Conference & Exhibition, Houston, TX, January 28, 1997.
Bhalerao, M. S. and Moon, T. J. “Instability in Layered Media
in the Context of Fiber Waviness in Unidirectional Composites,”
ASME International Mechanical Engineering Congress & Exhibition,
Atlanta, GA, Nov 17-22, 1996.
Kim, J., Moon, T. J. and Howell, J. R., “Effects of Process
Variables on In-Situ Curing for Thick Composites Using Infrared
Heating,” ASME International Mechanical Engineering Congress &
Exhibition, Atlanta, GA, Nov 17-22, 1996.
Yee, K.–C., and Moon, T. J., “Stress Analysis of an
Orthotropic Right Circular Cylinder Subject to Arbitrary
External Loading,” ASME International Mechanical Engineering
Congress & Exhibition, Atlanta, GA, Nov 17-22 1996.
Kim, J., Moon, T. J. and Howell, J. R., “Thermal Analysis and
Process Window Development for the In-Situ Curing of Thermoset
Composites,” 31st ASME National Heat Transfer Conference,
Houston, TX, August 3-6, 1996.
Joyce, P.J., Kugler, D., Bhalerao, M.S. and Moon, T.J., “The
Effect of Fiber Waviness on Global Structural Performance,”
Sixth International Conference on Marine Applications of
Composite Materials, Cocoa Beach, FL, March 19, 1996.
Hudson, R.S. and Moon, T.J., “Homopolar Pulse Welding (HPW)
of HSLA Linepipe for Deepwater J-LAY Applications,” Energy Week
‘96: The Energy–Sources Technology Conference & Exhibition,
Houston, TX, January 30–February 1, 1996.
Kim, J., Moon, T.J. and Howell, J.R., “Kinetic Model and
Glass Transition Temperature for Prepeg AS4/3501–6,” Fourth
International Conference on Polymer Characterization, Denton,
TX, January 18, 1996.
Bhalerao, M.S. and Moon, T.J., “Stability of Nonhomogeneous
Continua: Incremental Deformation Approach,” 32nd Annual
Technical Meeting of Society of Engineering Science, New
Orleans, LA, October 29–November 1, 1995.
Bhalerao, M.S. and Moon, T.J., “Micromechanics of Local
Viscoelastic Buckling in Thick Composites,” Second International
Conference on Composites Engineering, ICCE/2, New Orleans, LA,
August 21–24, 1995.
Bhalerao, M.S. and Moon, T.J., ‘‘A Strongly Converging
Numerical Procedure Based on the Bisection Method for Evaluation
of the Critical Load and Wavelength of a Multilayered Medium,’’
Third U.S. National Congress of Computational Mechanics, Dallas,
TX, June 14, 1995.
Chern, B.–C., Moon, T.J. and Howell, J.R., “Dependent
Radiative Transfer Regime for Unidirectional Fiber Reinforced
Composites Upon Normal Incident Radiation,” 4th ASME/JSME
Thermal Engineering Joint Conference, Maui, HI, March 23, 1995.
Moon, T.J., “Process–Induced Fiber/Ply–Waviness in
Thick–Section Composite Laminates,” ONR Mechanics of Composites
Program Review, Alexandria, VA, December 13, 1994.
Bhalerao, M.S. and Moon, T.J., “Imperfection Sensitivity and
Growth–of–Waviness in Laminated Composites,” Mechanics of
Materials Processing and Manufacturing Symposium, Applied
Mechanics Division, ASME International Mechanical Engineering
Congress & Exhibition, Chicago, IL, November 9, 1994.
Joyce, P.J., Kugler, D. and Moon, T.J., ‘‘Investigation of
Process–Induced Fiber–Wrinkled Regions in Composite Laminates,’’
31st Annual Technical Meeting of Society of Engineering Science,
College Station, TX, October 10–12, 1994.
Bhalerao, M.S. and Moon, T.J., ‘‘Review of Modeling
Techniques for Process–Induced Waviness in Composite
Laminates,’’ 31st Annual Technical Meeting of Society of
Engineering Science, College Station, TX, October 10–12, 1994.
Moon, T.J., “Investigation of Process–Induced Fiber–Wrinkled
Regions in Composite Laminates,” Problems in Processing and
Performance of Engineered Materials, 1994 NSF Institute for
Mechanics and Materials Young Investigator’s Meeting, Alcoa
Technical Center, PA, August 9, 1994.
Moon, T.J., “Investigation of Process–Induced Fiber–Wrinkled
Regions in Composite Laminates,” ONR Mechanics of Composites
Program Review, Carderock Division, Naval Surface Warfare
Center, Bethesda, MD, June 30, 1994.
Chern, B.–C., Moon, T.J. and Howell, J.R., “Dependent
Scattering Effects on Wave Propagation Through Filament–Wound
Composites,” 6th AIAA/ASME Thermophysics and Heat Transfer
Conference, Colorado Springs, CO, June 22, 1994.
Chern, B.–C., Moon, T.J. and Howell, J.R.,
“Angle–of–Incidence Dependent Scattering Effects in Arrays of
Parallel Cylinders Typical of Filament–Wound Composites,” 6th
AIAA/ASME Thermophysics and Heat Transfer Conference, Colorado
Springs, CO, June 21, 1994.
Moon, T.J., “Process–Induced Fiber/Ply Waviness in
Thick–Section Composite Laminates,” Office of Naval Research
Grantees Meeting, Carderock, MD, March, 1994.
Moon, T.J., “Polymer Composite Processing,” First Department
of the Army Advanced Composites Conference: Manufacturing
Technology and Repair of Adhesive and Composite Components,
Corpus Christi Army Depot, Corpus Christi, TX, February 9, 1994.
Chern, B.–C., Moon, T.J. and Howell, J.R., “In–Situ Curing of
Tape–Wound Structures Using Infrared Heating,” ASME Winter
Annual Meeting, New Orleans, LA, December 2, 1993.
Portillo, D.E. and Moon, T.J., “Modeling of Radiation in
Gas–Shielded Arc Welding by the Zonal Method,” ASME Winter
Annual Meeting, New Orleans, LA, December 2, 1993.
B.–C. Chern and T.J. Moon, “Dependent Scattering and Oblique
Incidence Effects on the Radiation Heat Transfer Through
Closely–Packed, Aligned, Parallel Cylinders,” NSF Workshop:
Radiation Heat Transfer in Highly Coupled Physical Systems, The
University of Texas at Austin, October 6, 1993.
Moon, T.J., “Continuous–Curing of Filament Wound Structures
Using Infrared Heating,” NSF DMII Annual Report, Video
Presentation, January 10, 1993.
Moon, T.J., “Electromagnetic Pump with Thin Metal Walls, ASME
Winter Annual Meeting, Anaheim, CA, November 9, 1992.
Ma, N., Moon, T.J. and Walker, J.S., “Electromagnetic Pump
with Thin Metal Walls,” Advanced Energy Systems Session 2, ASME
Winter Annual Meeting, Anaheim, CA, November 9, 1992.
Moon, T.J., “Process–Induced Fiber/Ply–Waviness in
Thick–Section Composite Laminates,” ONR Mechanics of Composites
Program Review, College Park, MD, June 29, 1992.
Moon, T.J., “Continuous Curing of Thick–Section
Filament–Wound Structures Using IR–Heating,” First International
Conference on Transport Phenomena in Processing, Honolulu, HI,
March 25, 1992.
Chern, B.–C., Moon, T.J. and Howell, J.R., “Assessment of
Using In–Situ IR–Heat to Cure Thermoset, Filament–Wound
Structures,” First International Conference on Transport
Phenomena in Processing, Honolulu, HI, March 22–26, 1992.
|
Latest
Updated:
03/17/2008 |
|
