D.E. Portillo and T.J. Moon, "Modeling of Radiation in Gas-Shielded Arc Welding by the Zonal Method,"

**COMPOSITES PROCESSING**

**In-Situ Curing and On-Line Consolidation of Polymer Composites**

B.-C. Chern, T.J. Moon and J.R. Howell, "Thermal Analysis of In-Situ
Curing for Thermoset, Hoop-Wound Structures Using Infrared Heating: Part
I--Predictions Assuming Independent Scattering," ASME *Journal of Heat
Transfer, *Vol. 117, No. 3, pp. , 1995.

B.-C. Chern, T.J. Moon and J.R. Howell, "Thermal Analysis of In-Situ Curing for
Thermoset, Hoop-Wound Structures Using Infrared Heating: Part II--Dependent Scattering Effect," ASME *Journal of Heat Transfer*,* *Vol. 117, No. 3, pp. , 1995.

B.-C. Chern, T.J. Moon and J.R. Howell, "Modeling of Radiation-Initiated
Cure-on-the-Fly of Epoxy-Matrix Composite Cylinders," *Journal of Materials Processing and Manufacturing*, Vol. 2, No. 4, pp. 373-390, 1994.

B.-C. Chern, T.J. Moon and J.R. Howell, "Measurement of the Temperature- and
Cure-Dependence of the Thermal Conductivity of Epoxy Resin," *Experimental Heat Transfer*, Vol. 6, pp. 157-174, 1993.

B.-C. Chern, T.J. Moon and J.R. Howell, "Dependent Radiative Transfer Regime
for Unidirectional Fiber Reinforced Composites Upon Normal Incident Radiation," *Proceedings of the 4th ASME/JSME Thermal Engineering Joint Conference*, Maui, HI, March 19-24, 1995, in press.

B.-C. Chern, T.J. Moon and J.R. Howell, "Angle-of-Incidence Dependent
Scattering Effects in Arrays of Parallel Cylinders Typical of Filament-Wound
Composites," 6th AIAA/ASME Thermophysics and Heat Transfer Conference, Colorado Springs, CO, June 20-23, ASME HTD-Vol. 276 *Radiative Heat Transfer: Current Research*, pp. 79-90, 1994.

B.-C. Chern, J.R. Howell and T.J. Moon, "Dependent Scattering Effects on Wave
Propagation Through Filament-Wound Composites," 6th AIAA/ASME Thermophysics and Heat Transfer Conference, Colorado Springs, CO, June 20-23, ASME HTD-Vol. 276 *Radiative Heat Transfer: Current Research*, pp. 15-20, 1994.

T.J. Moon, "Modeling and Control of Manufacturing Processes," *Proceedings of the 1994 NSF Design and Manufacturing Grantees Conference*, pp. 617-618, Cambridge, MA, January 5-7, 1994.

B.-C. Chern, T.J. Moon and J.R. Howell, "Assessment of Using In-Situ IR-Heat to
Cure Thermoset," Filament-Wound Structures, *Proceedings of the First
International Conference on Transport Phenomena in Processing*, pp.
1303-1313, Honolulu, HI, March 22-26, 1992.

B.-C. Chern, T.J. Moon and J.R. Howell, "Dependent Scattering and Oblique
Incidence Effects on the Radiation Heat Transfer Through Closely-Packed,
Aligned, Parallel Cylinders," *NSF Workshop: Radiation Heat Transfer in
Highly Coupled Physical Systems*, Austin, TX, October 4-8, 1993.

B.-C. Chern, T.J. Moon and J.R. Howell, "Enthalpy of Reaction, Specific Heat
and Thermal Conductivity of Hercules 3501-6 Epoxy Resin System," *Journal of Composite Materials,* in review.

B.-C. Chern, T.J. Moon and J.R. Howell, "Experimental Validation and Thermal
Process Window Development for In-Situ Curing of Thermoset, Hoop-Wound
Structures Using Infrared Heating," *Journal of Composite Materials*, in
review.

B.-C. Chern, T.J. Moon and J.R. Howell, "Dependent Radiative Transfer Regime
for Unidirectional Fiber Reinforced Composites Upon Normal Incident Radiation," ASME *Journal of Heat Transfer*, in review.

**Process-Induced Fiber- and Ply-Waviness in Composites**

P.J. Joyce, D. Kugler, and T.J. Moon, "A Technique for Characterizing
Process-Induced Fiber Waviness in Unidirectional Composite
Laminates - Using Optical Microscopy," *Journal of Composite Materials*,
1997.

D. Kugler, P.J. Joyce, and T.J. Moon, "Investigation of the Effect of
Part Length on Process-Induced Fiber-Wrinkled Regions in Composite Laminates,"
*Journal of Composite Materials*, 1997.

M.S. Bhalerao and T.J. Moon, "Stability of Nonhomogeneous Continua:
Incremental Deformation Approach," *Proceedings of the 32nd Annual Technical Meeting of Society of Engineering Science*, New Orleans, LA, October 29-November 1, 1995.

M.S. Bhalerao and T.J. Moon, "Micromechanics of Local Viscoelastic Buckling in
Thick Composites," *Proceedings of the Second International Conference on
Composites Engineerng*, ICCE/2, New Orleans, LA, August 21-24, 1995.

M. S. Bhalerao and T. J. Moon, 1995, ``A Strongly Converging Numerical
Procedure Based on the Bisection Method for Evaluation of the Critical Load and Wavelength of a Multilayered Medium,'' In the *Proceedings of *the
*Third U.S. National Congress of Computational Mechanics-1995, *Dallas,
TX, pp. 338.

P.J. Joyce, D. Kugler and T. J. Moon, 1994, ``Investigation of Process-Induced
Fiber-Wrinkled Regions in Composite Laminates,'' In the *Proceedings of the
31st Annual Technical Meeting of Society of Engineering Science*, October
10-12, College Station, TX, pp.83.

M. S. Bhalerao and T. J. Moon, 1994, ``Review of Modeling Techniques for
Process-Induced Waviness in Composite Laminates,'' In the *Proceedings of the 31st Annual Technical Meeting of Society of Engineering Science*, October 10-12, College Station, TX, pp.247.

M.S. Bhalerao and T.J. Moon, "Imperfection Sensitivity and Growth-of-Waviness in Laminated Composites," ASME International Mechanical Engineering Congress and Exhibition, Chicago, IL, November 6-11, ASME AMD-Vol. 194 *Mechanics of Materials Processing and Manufacturing 1994*, pp. 361-385, 1994.

M.S. Bhalerao and T.J. Moon, "On the Growth-of-Waviness in
Fiber-Reinforced Polymer Composites: Viscoelastic Bifurcation and Imperfection Sensitivity," *Journal of Applied Mechanics*, in press.

M.S. Bhalerao and T.J. Moon, "Micromechanics of Local Viscoelastic Buckling in
Multi-Layered Media," *Journal of Composites Engineering*, in review.

T.J. Moon, M.S. Bhalerao, P.J. Joyce and D.Kugler, "Polymer Composite
Processing: Models and Experiments," *Proceedings of the 1995 NSF Design and Manufacturing Grantees Conference*, San Diego, CA, January 4-6, 1995.

**MAGNETOHYDRODYNAMICS**

N. Ma, T.J. Moon and J.S. Walker, "Electromagnetic Pump with Thin Metal
Walls," ASME *Journal of Fluids Engineering*, Vol. 116, No. 2, pp.
298-302, 1994.

N. Ma, J.S. Walker, T.J. Moon, T.Q. Hua and B.F. Picologlou, "Electromagnetic
Control of Flow Distribution Between Parallel Ducts of Liquid-Metal-Cooled
Blankets," *Fusion Technology*, Vol. 25, No. 4, pp. 398-410, 1994.

T.J. Moon, T.Q. Hua, J.S. Walker and B.F. Picologlou, "Liquid Metal Flow in a
Simple Manifold with a Strong Transverse Magnetic Field," *Applied Scientific Research, *Vol. 49, pp. 49-65, 1992.

N. Ma, T.J. Moon and J.S. Walker, "Electromagnetic Pump with Thin Metal Walls," 1992 ASME Winter Annual Meeting, Anaheim, CA, November 9-13,
*92-WA/AES-2*, 1992.

T.J. Moon, T.Q. Hua and J.S. Walker, "Liquid Metal Flow in a Backward Elbow in
the Plane of a Strong Magnetic Field," *Journal of Fluid Mechanics*, Vol.
227, pp. 273-291, 1991.

A.L. Ting, J.S. Walker, T.J. Moon, C.B. Reed and B.F. Picologlou, "Linear
Stability Analysis for High-Velocity Boundary Layers in Liquid-Metal
Magnetohydrodynamic Flows," *International Journal of Engineering
Science*, Vol. 29, No. 8, pp. 939-948, 1991.

A.L. Ting, J.S. Walker, T.J. Moon, C.B. Reed and B.F. Picologlou, "Linear
Stability Results for High-Velocity Boundary Layers in Self-Cooled Liquid Metal Tokamak Blankets," *Fusion Technology*, Vol. 19, pp. 1036-1039, 1991.

T.J. Moon and J.S. Walker, "Liquid Metal Flow Through a Sharp Elbow in the
Plane of a Strong Magnetic Field," *Journal of Fluid Mechanics*, Vol. 213,
pp. 397-418, 1990.

T.J. Moon, "Modeling Liquid Metal Duct Flows Using a Hybrid
Numerical-Analytical Scheme," *Final Report DOE-ANL 01622401*, September
1990.

T.J. Moon, *Liquid Metal Flow in a Sharp Elbow in a Uniform Transverse
Magnetic Field*, Ph.D. Thesis, University of Illinois at Urbana, 1989.

T.J. Moon and J.S. Walker, "Liquid Metal Flow in a Large-Radius Elbow with a
Uniform Magnetic Field," *Journal de Mécanique théorique et
appliquée*, Vol. 7, No. 4, pp. 443-459, 1988.

**STRUCTURED MODELING--EXTENDED BOND GRAPHS**

F.-S. Lee, T.J. Moon and G.Y. Masada, "Extended Bond Graph Reticulation of
Piezoelectric Continua," ASME *Journal of Dynamic Systems, Measurement and Control, *Vol. 117, No. 1, pp. 1-7, 1995.

F.-S. Lee, T.J. Moon and G.Y. Masada, "Modeling of Distributed
Electromechanical Continua Using Extended Bond Graphs," *Journal of the
Franklin Institute*, Vol. 331B, No. 1, pp. 43-60, 1994.

F.-S. Lee, T.J. Moon and G.Y. Masada, "Extended Bond Graph Reticulation of
Magnetostrictive Continua," *Journal of Applied Physics*, Vol. 75, No. 9,
pp. 4621-4627, 1994.

F.-S. Lee, T.J. Moon and G.Y. Masada, "Representation of Electromagnetic Fields
Using Extended Bond Graphs," *Journal of Applied Physics*, in review.

F.-S. Lee, T.J. Moon and G.Y. Masada, "Extended Bond Graph Reticulation of
Thermopiezoelectric Continua," ASME *Journal of Dynamic Systems, Measurement and Control*, in review.

**BOOKS CO-EDITED**

*Mechanics of Materials Processing and Manufacturing 1994*, ed. T. Moon
and M. Ghasemi Nejhad, ASME AMD-Vol. 194, ASME International Mechanical
Engineering Congress and Exhibition, Chicago, IL, November 6-11, 1994.

*Transport Phenomena in Manufacturing and Materials Processing*, ed. M.K. Alam, C.P. Grigoropoulos, Y. Joshi, M.V. Karwe, A.S. Lavine, T. Moon and R.N.
Smith, ASME HTD-Vol. 280, 6th AIAA/ASME Thermophysics and Heat Transfer
Conference, Colorado Springs, CO, June 20-23, 1994.

*Heat and Mass Transfer in Materials Processing and Manufacturing*, ed.
D.A. Zumbrunnen, J. Seyed-Yagoobi, V. Prasad, M. Charmchi, A.G. Lavine, M.K.
Moallemi, N.A. Hussain, and T. Moon, ASME HTD-Vol. 261, ASME Winter Annual
Meeting, New Orleans, LA, November 28-December 3, 1993.