PUBLICATIONS:

A. REFEREED ARCHIVAL JOURNALS

M.S. Bhalerao and T.J. Moon, "On the Growth-of-Waviness in Fiber-Reinforced Polymer Composites: Viscoelastic Bifurcation and Imperfection Sensitivity," Journal of Applied Mechanics, in press.

B.-C. Chern, T.J. Moon and J.R. Howell, "Thermal Analysis of In-Situ Curing for Thermoset, Hoop-Wound Structures Using Infrared Heating: Part I--Predictions Assuming Independent Scattering," ASME Journal of Heat Transfer, Vol. 117, No. 3, pp. , 1995.

B.-C. Chern, T.J. Moon and J.R. Howell, "Thermal Analysis of In-Situ Curing for Thermoset, Hoop-Wound Structures Using Infrared Heating: Part II--Dependent Scattering Effect," ASME Journal of Heat Transfer, Vol. 117, No. 3, pp. , 1995.

F.-S. Lee, T.J. Moon and G.Y. Masada, "Extended Bond Graph Reticulation of Piezoelectric Continua," ASME Journal of Dynamic Systems, Measurement and Control, Vol. 117, No. 1, pp. 1-7, 1995.

F.-S. Lee, T.J. Moon and G.Y. Masada, "Modeling of Distributed Electromechanical Continua Using Extended Bond Graphs," Journal of the Franklin Institute, Vol. 331B, No. 1, pp. 43-60, 1994.

F.-S. Lee, T.J. Moon and G.Y. Masada, "Extended Bond Graph Reticulation of Magnetostrictive Continua," Journal of Applied Physics, Vol. 75, No. 9, pp. 4621-4627, 1994.

B.-C. Chern, T.J. Moon and J.R. Howell, "Modeling of Radiation-Initiated Cure-on-the-Fly of Epoxy-Matrix Composite Cylinders," Journal of Materials Processing and Manufacturing, Vol. 2, No. 4, pp. 373-390, 1994.

N. Ma, T.J. Moon and J.S. Walker, "Electromagnetic Pump with Thin Metal Walls," ASME Journal of Fluids Engineering, Vol. 116, No. 2, pp. 298-302, 1994.

N. Ma, J.S. Walker, T.J. Moon, T.Q. Hua and B.F. Picologlou, "Electromagnetic Control of Flow Distribution Between Parallel Ducts of Liquid-Metal-Cooled Blankets," Fusion Technology, Vol. 25, No. 4, pp. 398-410, 1994.

B.-C. Chern, T.J. Moon and J.R. Howell, "Measurement of the Temperature- and Cure-Dependence of the Thermal Conductivity of Epoxy Resin," Experimental Heat Transfer, Vol. 6, pp. 157-174, 1993.

T.J. Moon, T.Q. Hua, J.S. Walker and B.F. Picologlou, "Liquid Metal Flow in a Simple Manifold with a Strong Transverse Magnetic Field," Applied Scientific Research, Vol. 49, pp. 49-65, 1992.

T.J. Moon, T.Q. Hua and J.S. Walker, "Liquid Metal Flow in a Backward Elbow in the Plane of a Strong Magnetic Field," Journal of Fluid Mechanics, Vol. 227, pp. 273-291, 1991.

A.L. Ting, J.S. Walker, T.J. Moon, C.B. Reed and B.F. Picologlou, "Linear Stability Analysis for High-Velocity Boundary Layers in Liquid-Metal Magnetohydrodynamic Flows," International Journal of Engineering Science, Vol. 29, No. 8, pp. 939-948, 1991.

A.L. Ting, J.S. Walker, T.J. Moon, C.B. Reed and B.F. Picologlou, "Linear Stability Results for High-Velocity Boundary Layers in Self-Cooled Liquid Metal Tokamak Blankets," Fusion Technology, Vol. 19, pp. 1036-1039, 1991.

T.J. Moon and J.S. Walker, "Liquid Metal Flow Through a Sharp Elbow in the Plane of a Strong Magnetic Field," Journal of Fluid Mechanics, Vol. 213, pp. 397-418, 1990.

T.J. Moon and J.S. Walker, "Liquid Metal Flow in a Large-Radius Elbow with a Uniform Magnetic Field," Journal de Mecanique theorique et applique, Vol. 7, No. 4, pp. 443-459, 1988.

F.-S. Lee, T.J. Moon and G.Y. Masada, "Representation of Electromagnetic Fields Using Extended Bond Graphs," Journal of Applied Physics, in review.

F.-S. Lee, T.J. Moon and G.Y. Masada, "Extended Bond Graph Reticulation of Thermopiezoelectric Continua," ASME Journal of Dynamic Systems, Measurement and Control, in review.

B.-C. Chern, T.J. Moon and J.R. Howell, "Enthalpy of Reaction, Specific Heat and Thermal Conductivity of Hercules 3501-6 Epoxy Resin System," Journal of Composite Materials, in review.

B.-C. Chern, T.J. Moon and J.R. Howell, "Experimental Validation and Thermal Process Window Development for In-Situ Curing of Thermoset, Hoop-Wound Structures Using Infrared Heating," Journal of Composite Materials, in review.

B.-C. Chern, T.J. Moon and J.R. Howell, "Dependent Radiative Transfer Regime for Unidirectional Fiber Reinforced Composites Upon Normal Incident Radiation," ASME Journal of Heat Transfer, in review.

M.S. Bhalerao and T.J. Moon, "Micromechanics of Local Viscoelastic Buckling in Multi-Layered Media," Journal of Composites Engineering, in review.

B. REFEREED CONFERENCE PROCEEDINGS

B.-C. Chern, T.J. Moon and J.R. Howell, "Dependent Radiative Transfer Regime for Unidirectional Fiber Reinforced Composites Upon Normal Incident Radiation," Proceedings of the 4th ASME/JSME Thermal Engineering Joint Conference, Maui, HI, March 19-24, 1995, in press.

B.-C. Chern, T.J. Moon and J.R. Howell, "Angle-of-Incidence Dependent Scattering Effects in Arrays of Parallel Cylinders Typical of Filament-Wound Composites," 6th AIAA/ASME Thermophysics and Heat Transfer Conference, Colorado Springs, CO, June 20-23, ASME HTD-Vol. 276 Radiative Heat Transfer: Current Research, pp. 79-90, 1994.

B.-C. Chern, J.R. Howell and T.J. Moon, "Dependent Scattering Effects on Wave Propagation Through Filament-Wound Composites," 6th AIAA/ASME Thermophysics and Heat Transfer Conference, Colorado Springs, CO, June 20-23, ASME HTD-Vol. 276 Radiative Heat Transfer: Current Research, pp. 15-20, 1994.

D.E. Portillo and T.J. Moon, "Modeling of Radiation in Gas-Shielded Arc Welding by the Zonal Method," ASME Winter Annual Meeting, New Orleans, LA, November 28-December 3, ASME PED-Vol. 64 Manufacturing Science and Engineering, pp. 879-884, 1993.

B.-C. Chern, T.J. Moon and J.R. Howell, "Assessment of Using In-Situ IR-Heat to Cure Thermoset," Filament-Wound Structures, Proceedings of the First International Conference on Transport Phenomena in Processing, pp. 1303-1313, Honolulu, HI, March 22-26, 1992.

N. Ma, T.J. Moon and J.S. Walker, "Electromagnetic Pump with Thin Metal Walls," 1992 ASME Winter Annual Meeting, Anaheim, CA, November 9-13, 92-WA/AES-2, 1992.

M.S. Bhalerao and T.J. Moon, "Imperfection Sensitivity and Growth-of-Waviness in Laminated Composites," ASME International Mechanical Engineering Congress and Exhibition, Chicago, IL, November 6-11, ASME AMD-Vol. 194 Mechanics of Materials Processing and Manufacturing 1994, pp. 361-385, 1994.

C. BOOKS AUTHORED/CO-AUTHORED, BOOKS EDITED/CO-EDITED, BOOK CHAPTERS

Mechanics of Materials Processing and Manufacturing 1994, ed. T. Moon and M. Ghasemi Nejhad, ASME AMD-Vol. 194, ASME International Mechanical Engineering Congress and Exhibition, Chicago, IL, November 6-11, 1994.

Transport Phenomena in Manufacturing and Materials Processing, ed. M.K. Alam, C.P. Grigoropoulos, Y. Joshi, M.V. Karwe, A.S. Lavine, T. Moon and R.N. Smith, ASME HTD-Vol. 280, 6th AIAA/ASME Thermophysics and Heat Transfer Conference, Colorado Springs, CO, June 20-23, 1994.

Heat and Mass Transfer in Materials Processing and Manufacturing, ed. D.A. Zumbrunnen, J. Seyed-Yagoobi, V. Prasad, M. Charmchi, A.G. Lavine, M.K. Moallemi, N.A. Hussain, and T. Moon, ASME HTD-Vol. 261, ASME Winter Annual Meeting, New Orleans, LA, November 28-December 3, 1993.

D. OTHER MAJOR PUBLICATIONS

T.J. Moon, M.S. Bhalerao, P.J. Joyce and D.Kugler, "Polymer Composite Processing: Models and Experiments," Proceedings of the 1995 NSF Design and Manufacturing Grantees Conference, San Diego, CA, January 4-6, 1995.

T.J. Moon, "Modeling and Control of Manufacturing Processes," Proceedings of the 1994 NSF Design and Manufacturing Grantees Conference, pp. 617-618, Cambridge, MA, January 5-7, 1994.

B.-C. Chern, T.J. Moon and J.R. Howell, "Dependent Scattering and Oblique Incidence Effects on the Radiation Heat Transfer Through Closely-Packed, Aligned, Parallel Cylinders," NSF Workshop: Radiation Heat Transfer in Highly Coupled Physical Systems, Austin, TX, October 4-8, 1993.

T.J. Moon, Liquid Metal Flow in a Sharp Elbow in a Uniform Transverse Magnetic Field, Ph.D. Thesis, University of Illinois at Urbana, 1989.

E. PUBLISHED REVIEWS none

F. TECHNICAL REPORTS

T.J. Moon, "Modeling Liquid Metal Duct Flows Using a Hybrid Numerical-Analytical Scheme," Final Report DOE-ANL 01622401, September 1990.