ARCHIVAL JOURNALS

  1. M. J. Moran and K. M. Marshek. 1972. Some matrix aspects of generalized dimensional analysis. J. Eng. Math, 6 (3), 291-303. (Also published in: Trans.16th Conf., U.S. Army Mathematicians, ARO-D Rep. 1971-72, U.S. Army Research Office, Durham, North Carolina.)

  2. M. J. Moran and K. M. Marshek. 1972. On steady heat conduction in regions with generation. ZAMM. 52, 547-49.

  3. K. M. Marshek and M. J. Moran. 1973. Self-similarity for differential equations of mechanics invariant under certain groups. Trans. 19th Conf., U.S. Army Mathematicians, ARO Rep. 73-3, U.S. Army Research Office, Durham, North Carolina.

  4. K. M. Marshek and M. J. Moran. 1974. Analysis of control system difference equations via group theoretic procedures. Int. J. Contr. 19 (3), 529-34.

  5. K. M. Marshek and M. J. Moran. 1975. A tabular approach to similarity analyses. Int. J. Mech. Eng. Educ. 3 (2), 127-36. (Also published in: Trans. 19th Conf., U.S. Army Mathematicians, ARO-D Rep. 73-3, U.S. Army Research Office, Durham, North Carolina.)

  6. K. M. Marshek. 1975. Some equations for relating wear in thermoplastic conveyor chain. Wear, 33, 195-98.

  7. K. M. Marshek, J. R. Gartner and R. C. O'Brien. 1975. Dispersion representation of warpage in machine parts. ASME Design Engineering Division, Technical Paper No. 75-DE-24, New York, New York.

  8. K. M. Marshek and J. G. Tokarski. 1975. Beer-can positioner. In: Novel Mechanisms II, Mechanical Engineering. 97 (7), 37. (Also published in: Mechanism Case Studies II, F. R. Tepper, Ed., ASME Publication 74-DET-56).

  9. K. M. Marshek. 1975. Baseball pitching machine. In: Novel Mechanisms II, Mechanical Engineering. 97 (7), 38. (Also in: ASME Publication 74-DET-56).

  10. K. M. Marshek. 1975. Transitional devices for the writer. IEEE Trans. Professional Communications. 18, 320-22. (Also republished in: A Guide for Writing Better Technical Papers, C. Harkins and D. L. Plung, eds., "Transitional Devices for the Writer," IEEE Press, New York, 1982.)

  11. K. M. Marshek, J. M. Rinehart and J. R. Gartner. 1976. Wear damage to a thermoplastic conveyor chain. Wear, 37, 387-91.

  12. K. M. Marshek. 1977. Mobius belt flex mechanism. In: Novel Mechanisms III, Mechanical Engineering. (Also in: ASME publication 76-DET-59).

  13. K. M. Marshek and J. R. Gartner. 1977. A technique for assessing the running life of thermoplastic conveyor chains. ASME Design Engr. Division, Technical Paper No. 77-DET-160.

  14. K. M. Marshek and P. K. C. Chan. 1977. Wear damage to plastic worms and gears. Wear, 44, 405-409.

  15. K. M. Marshek. 1978. Failures in plastic ball bearings. Wear, 52, 141-146.

  16. K. M. Marshek. 1979. On the analyses of sprocket load distribution. Mechanism and Machine Theory. 14, 135-140.

  17. K. M. Marshek, et al. 1978. Single copy newspaper dispensing mechanism. In: Novel Mechanisms IV, Mechanical Engineering. (Also published as ASME publication 78-DET-19).

  18. K. M. Marshek and P. K. C. Chan. 1981. Qualitative analysis of plastic worm and worm gear failures. Wear, 66, 261-271.

  19. B. H. Burr and K. M. Marshek. 1981. O-ring-wear test machine. Wear, 68, 21-32.

  20. G. C. Andries and K. M. Marshek. 1981. An experimental determination of kinetic friction for hardened, dry steel pairs. Wear, 72, 187-194.

  21. B. H. Burr and K. M. Marshek. 1982. An equation for the abrasive wear of elastomeric O-ring materials. Wear, 81, 347-356.

  22. K. M. Marshek, M. R. Naji, and G. C. Andries. 1982. An experimental study of rotor-filter pump performance. ASME Transactions, Journal of Energy Resources Technology, March 1982. (Also published as ASME publication 82-Pet-27.)

  23. M. C. Moyer and K. M. Marshek. 1982. An investigation of stresses in bolted connectors for marine risers. ASME Transactions, Journal of Energy Resources Technology, 104, 84-90. (Also published in: ASME Proceedings of the First

  24. Offshore Mechanics/Arctic Engineering/Deepsea Systems Symposium, Volume II, 1982, 155-162).

  25. M. O. Ross and K. M. Marshek. 1982. Four-square sprocket test machine. Mechanism and Machine Theory, 17, 321-326.

  26. M. R. Naji and K. M. Marshek. 1983. Toothed belt-load distribution. ASME Transactions, Journal of Mechanisms, Transmissions, and Automation in Design, 105, 339-347. (Also published as ASME publication 83-DE-7).

  27. M. R. Naji and K. M. Marshek. 1983. Analysis of sprocket load distribution. Mechanism and Machine Theory, 18, 349-356.

  28. M. R. Naji and K. M. Marshek. 1983. Experimental determination of the roller chain load distribution. ASME Transactions, Journal of Mechanisms, Transmissions, and Automation in Design, 105, 331-338. (Also published as ASME publication 83-DE-8).

  29. D. L. Miller, K. M. Marshek, and M. R. Naji. 1983. Determination of load distribution in a threaded connector. Mechanism and Machine Theory, 18, 421-430.

  30. M. R. Naji and K. M. Marshek. 1986. Analysis of roller chain sprocket pressure angles. Mechanism and Machine Theory, 19, 197-203.

  31. F. Sedov (K. M. Marshek). 1981. The self-energizing effect in certain pin-disc wear test machines. Wear, 71, 259-262.

  32. B. H. Eldiwany and K. M. Marshek. 1984. Experimental load distribution for double pitch steel roller chain on steel sprockets. Mechanism and Machine Theory, 19, 449-457.

  33. K. M. Marshek and H. H. Chen. 1985. Numerical solution for contact pressure distributions in misaligned self-lubricated journal bearings. 1984 SAE Transactions. (Also published as SAE publication 841125).

  34. K. M. Marshek and H. H. Chen. Effect of clearance on rotary rock bit journal bearing contact stress. Transactions of the ASME, Journal of Energy Resources Technology, 108(1) 1-7, 1986.

  35. K. M. Marshek, H. H. Chen, R. B. Connell, W. R. Hudson. Experimental determination of pressure distribution of truck tire-pavement contact. Pavement Response, Evaluation and Data Collection, Transportation Research Record 1070, 9-13, 1986.

  36. K. M. Marshek, H. H. Chen, R. B. Connell, C. L. Saraf. Effect of truck tire inflation pressure and axle load on flexible and rigid pavement performance. Pavement Response, Evaluation, and Data Collection, Transportation Research Record 1070, 14-20, 1986.

  37. K. M. Marshek, H. H. Chen, C. L. Saraf. Effects of truck tire contact pressure distribution on the design of flexible pavements -- A 3D finite element approach. Transportation Research Record 1095, 72-78.

  38. H. H. Chen, and K. M. Marshek. The effect of surface depressions on conformal and nonconformal contact pressure distributions. Transactions of the ASME, Journal of Applied Mechanics, 53(4), 779-784, 1986.

  39. H. Kim and K. M. Marshek. Forces between an abrasive belt and pulley. Mechanism and Machine Theory, 22(1) 97-103, 1987.

  40. H. H. Chen and K. M. Marshek. Effect of clearance and material property on contact pressure in two-dimensional conforming cylinders. Mechanism and Machine Theory, 23(l), 55-62, 1988.

  41. M. R. Naji and K. M. Marshek. The effects of the pitch difference on the load distribution of a roller chain drive. Mechanism and Machine Theory, 24(5), 351-362, 1990.

  42. P. J. Pacholke, and K. M. Marshek. Improved worm gear performance with colloidal molybdenum disulfide containing lubricants. Lubrication Engineering, 43(8), 623-628, 1987.

  43. J. G. Filas and K. M. Marshek. Analysis of active heave compensator for free hanging pipes in the ocean. ASME Transactions, Journal of Energy Resources Technology (In progress), 1988.

  44. B. H. Eldiwany and K. M. Marshek. Experimental load distribution for double pitch steel roller chain on polymer sprockets. Mechanism and Machine Theory, 24(5), 335-349, 1990.

  45. T. Koyama and K. M. Marshek. Toothed belts -- past, present, and future. Mechanism and Machine Theory, 23(3), 227-239, 1988.

  46. K. M. Marshek and H. H. Chen. 1988. Discretization pressure-wear theory for bodies in sliding contact. Transactions of the ASME, Journal of Tribology, 111(1), 95-100. Also published as ASME publication 88-Trib-25.

  47. K. M. Marshek and H. Kim. Belt forces and surface model for a cloth backed and a rubber backed flat belt. ASME Transactions, Journal of Mechanisms, Transmissions, and Automation in Design, 110(1), 93-99, 1988.

  48. K. M. Marshek and H. Kim. The effect of belt velocity on flat belt drive behavior. Mechanism and Machine Theory, 22(6), 523-527, 1987.

  49. K. M. Marshek and H. Kim. Belt forces with grinding. ASME Transactions, Journal of Engineering for Industry, 110(3), 201-211, 1987.

  50. P. J. Pacholke, and K. M. Marshek. Improved worm gear performance with colloidal molybdenum disulfide containing lubricants. Gear Technology, 5(6), 10-16, 1988.

  51. H. H. Chen and K. M. Marshek. Effect of tangential traction on the contact pressure for two dissimilar elastic bodies in sliding contact. (In progress), 1988.

  52. H. H. Chen and K. M. Marshek. Finite element analysis of elastic bodies in slip-stick contact. (In progress), 1988.

  53. M. Kagotani, T. Koyama, K. M. Marshek. A study on transmission error of timing belt drives with eccentric pulley, effect of initial tension. Transactions of the Japan Society of Mechanical Engineers, (In review), 1988.

  54. K. M. Marshek, R. E. DaSilva, and S. M. Kannapan. Mower-Thrown Object Accidents. Public Roads. 52(4), 119-124, 1989.

  55. S. M. Kannapan and K. M. Marshek. An approach to nomenclature and classification for mechanical transmissions. Mechanism and Machine Theory, (In review), 1990.

  56. S. M. Kannapan and K. M. Marshek. A parametric approach to machine and machine element design. International Journal of Mechanical Engineering Education, 19(3), 197-212, 1991.

  57. S. M. Kannapan and K. M. Marshek. An algebraic and predicate logic approach to representation and reasoning in machine design. Mechanism and Machine Theory. 25(3), 335-353, 1990.

  58. S. M. Kannapan, K. M. Marshek and W. S. Reed, A logic based computational model for synthesizing mechanical system designs", SBIR report for the Air Force, ALFA Engineering Inc., Austin, Texas, June 1990.

  59. S. M. Kannapan and K. M. Marshek, "Design synthetic reasoning: A methodology for mechanical design", Research in Engineering Design, Vol 2, 221-238, 1991.

  60. S. M. Kannapan and K. M. Marshek, Design synthetic reasoning, Mechanism and Machine Theory as Part I, II, III papers, 26(7) 711-770, 1991.

  61. S. M. Kannapan and K. M. Marshek, An approach to parametric redesign and negotiation in concurrent engineering using design diagrams, in Intelligent Design and Manufacturing (editor A. N. Kusiak), John-Wiley & Sons, to be published, 1992.

  62. S. M. Kannapan and K. M. Marshek, Patentability evaluation of engineered devices", Proc. First International Conference on Artificial Intelligence in Design, Edinburgh, U.K., pp. 83-101, 1991.

  63. H. Kim and K. M. Marshek, Force distribution for a flat belt drive with a concentrated contact load, Mechanism and Machine Theory, 25(6), 667-677, 1991.

  64. W. Wang and K. M. Marshek, Determination of load distribution in a threaded connector with yielding threads, Mechanism and Machine Theory, to be published, 1991.

  65. W. Wang and K. M. Marshek, Determination of load distribution and residual stresses in a yielding threaded connector under a cyclic loading, ASME Journal of Vibration and Acoustics, to be published, 1991.

  66. W. Wang and K. M. Marshek, Determination of load distribution in threaded connectors with non contacting and varying pitch threads, ASME Journal of Mechanical Design, to be published, 1991.

  67. W. Wang and K. M. Marshek, Optimized load distribution for multi-nut fasteners, International Journal for Numerical Methods in Engineering, to be published, 1991.

  68. W. Wang and K. M. Marshek, Static analysis of jam nut's anti-loosening mechanism, ASME Journal of Engineering for Industry, to be published, 1991.

  69. W. Wang and K. M. Marshek, Determination of the load distribution in a threaded connector having dissimilar materials and varying thread stiffness, ASME Journal of Engineering for Industry, to be published, 1991.

  70. T. L. Brown, K. M. Marshek, et al, An experimental procedure for estimating ride quality for passive and semi-active suspension automobiles, SAE paper 922141, Warrendale, Pennsylvania.

  71. Wang, W., and K.M. Marshek, "Determination of the Load Distribution in Threaded Connector Having Dissimilar Materials and Varying Thread Stiffness", Transactions of the ASME, Journal of Engineering for Industry, Vol 117, No. 1, pp 1-8, 1995.

  72. Wang, W., and K.M. Marshek, "Determination of the Load Distribution in Threaded Connector with Yielding Threads", Mechanism and Machine Theory, Vol 30, No. 3, pp 203-210, 1995.

[ UT UT | Home Home | Biosketch Biosketch | Teaching Teaching | Research Research | Experience Experience ]
[Honors Honors Publications Publications | Dissertations Dissertations | Misc.Miscellaneous ]

Professor Kurt M. Marshek
Department of Mechanical Engineering
The University of Texas at Austin

email Kurt. M. Marshek :

kmarshek@mail.utexas.edu