BOUND TECHNICAL REPORTS

1. K. M. Marshek, et al. 1973. Synthetic carbohydrate: An aid to nutrition in the future. NASA-ASEE Engineering Systems Design Final Rep., Stanford University.

2. G. Panko, II and K. M. Marshek. June 1973. Vehicle anti-theft devices and systems. Mechanical Engineering Dept. Rep., University of Connecticut.

3. K. M. Marshek and J. R. Gartner. 1974. An experimental investigation of pin flaring force. Mechanical Engineering Dept. Rep. No. 201, University of Connecticut.

4. K. M. Marshek and J. R. Gartner. 1974. Chain design validation via tensile and fatigue tests. Mechanical Engineering Dept. Rep. No. 200, University of Connecticut.

5. K. M. Marshek and J. R. Gartner. 1974. Qualitative test data from one-inch pitch chain four-square tester. Mechanical Engineering Dept. Rep. No. 213, University of Connecticut.

6. K. M. Marshek and J. R. Gartner. 1974. Qualitative test data from two-inch pitch chain four-square tester. Mechanical Engineering Dept. Rep. No. 214, University of Connecticut.

7. K. M. Marshek and J. R. Gartner. 1974. Qualitative zero load chain test data. Mechanical Engineering Dept. Rep. No. 212, University of Connecticut.

8. J. R. Gartner and K. M. Marshek. 1974. On establishing confidence bands for chain strength. Mechanical Engineering Dept. Rep. No. 218, University of Connecticut.

9. K. M. Marshek and J. R. Gartner. 1974. An experimental investigation of chain operating temperature. Mechanical Engineering Dept. Rep. No. 215, University of Connecticut.

10. K. M. Marshek, R. C. O'Brien and J. R. Gartner. 1974. An investigation of ultra high molecular weight polyethylene sprocket warpage. Mechanical Engineering Dept. Rep. No. 222, University of Connecticut.

11. K. M. Marshek and J. R. Gartner. 1974. Radiographic inspection of thermoplastic chain links. Mechanical Engineering Dept. Rep. No. 220, University of Connecticut.

12. K. M. Marshek, J. R. Gartner and L. G. Diaz. 1974. An experimental determination of static coefficients of friction. Mechanical Engineering Dept. Rep. No. 221, University of Connecticut.

13. K. M. Marshek, R. C. O'Brien and J. R. Gartner. 1974. An experimental investigation of split-hub torque capacity. Mechanical Engineering Dept. Rep. No. 225, University of Connecticut.

14. K. M. Marshek. 1974. Single tooth thermoplastic sprocket strength. Mechanical Engineering Dept. Rep. No. 230, University of Connecticut.

15. J. R. Gartner and K. M. Marshek. 1975. Chain wrap thermoplastic sprocket strength. Mechanical Engineering Dept. Rep. No. 237, University of Connecticut.

16. J. R. Gartner, K. M. Marshek and M. Deeg. 1975. Chain friction losses. Mechanical Engineering Dept. Rep. No. 238, University of Connecticut.

17. K. Doyle and K. M. Marshek. 1975. Cadmium plated steel split-hub torque capacity. Mechanical Engineering Dept. Rep. No. 240, University of Connecticut.

18. J. M. Rinehart and K. M. Marshek. 1975. Thermoplastic table-top chain release fatigue tests. Mechanical Engineering Dept. Rep. No. 241, University of Connecticut.

19. K. M. Marshek. 1975. Bearing wear in thermoplastic chain. Mechanical Engineering Dept. Rep. No. 301, University of Connecticut.

20. J. M. Rinehart and K. M. Marshek. 1975. The tensile strength of table-top conveyor chain. Mechanical Engineering Dept. Rep. No. 310, University of Connecticut.

21. J. M. Rinehart and K. M. Marshek. 1975. Wear of thermo plastic machine element materials. Mechanical Engineering Dept. Rep. No. 312, University of Connecticut.

22. J. M. Rinehart and K. M. Marshek. 1975. Scanning electron microscopic studies of thermoplastic conveyor chain. Mechanical Engineering Dept. Rep. No. 321, University of Connecticut.

23. J. M. Rinehart and K. M. Marshek. 1975. Hardness tests of thermoplastic machine elements. Mechanical Engineering Dept. Rep. No. 325, University of Connecticut.

24. J. M. Rinehart and K. M. Marshek. 1975. The tensile strength of thermoplastic conveyor chain. Mechanical Engineering Dept. Rep. No. 357, University of Connecticut.

25. J. M. Rinehart and K. M. Marshek. 1975. Single tooth sprocket ultimate strength. Mechanical Engineering Dept. Rep. No. 402, University of Houston.

26. J. M. Rinehart and K. M. Marshek. 1975. Chain wrap strength of thermoplastic sprockets. Mechanical Engineering Dept. Rep. No. 404, University of Houston.

27. J. M. Rinehart and K. M. Marshek. 1975. Pintle chain fatigue and tensile tests. Mechanical Engineering Dept. Rep. No. 409, University of Houston.

28. J. M. Rinehart and K. M. Marshek. 1975. Tensile strength tests of thermoplastic conveyor chain. Mechanical Engineering Dept. Rep. No. 413, University of Houston.

29. J. M. Rinehart and K. M. Marshek. 1975. The strength of thermoplastic chain after exposure to chemical reagents. Mechanical Engineering Dept. Rep. No. 427, University of Connecticut.

30. J. M. Rinehart and K. M. Marshek. 1975. Water absorption in pintle chain. Mechanical Engineering Dept. Rep. No. 428, University of Connecticut.

31. J. M. Rinehart and K. M. Marshek. 1975. The tensile strength of six thermoplastic materials. Mechanical Engineering Dept. Rep. No. 456, University of Houston.

32. J. M. Rinehart and K. M. Marshek. 1975. The tensile strength of high temperature thermoplastic conveyor chain. Mechanical Engineering Dept. Rep. No. 467, University of Houston.

33. J. M. Rinehart and K. M. Marshek. 1975. Elevated temperature tensile tests on thermoplastic conveyor chain. Mechanical Engineering Dept. Rep. No. 469, University of Connecticut.

34. D. T. Cindric and K. M. Marshek. 1975. The tensile strength of Browning conveyor chain. Mechanical Engineering Dept. Rep. No. 475, University of Houston.

35. J. M. Rinehart and K. M. Marshek. 1975. Strength characteristics of conveyor belt splicing methods. Mechanical Engineering Dept. Rep. No. 501, University of Connecticut.

36. J. M. Rinehart and K. M. Marshek. 1975. Fatigue strength of polyvinyl chloride belting. Mechanical Engineering Dept. Rep. No. 1550, University of Houston.

37. J. M. Rinehart and K. M. Marshek. 1975. The flex strength of TENSIL-X conveyor joints. Mechanical Engineering Dept. Rep. No. 1551, University of Houston.

38. K. M. Marshek, et al. 1975. Cargo transportation by airships: A systems study. NASA CR2636, Johnson Space Center.

39. D. T. Cindric and K. M. Marshek. 1975. A preliminary study of the strength characteristics of flexible hinge-type joints. Part I. Mechanical Engineering Dept. Rep. No. 1776, University of Houston.

40. D. T. Cindric and K. M. Marshek. 1976. A preliminary study of the strength characteristics of flexible hinge-type joints. Part II. Mechanical Engineering Dept. Rep. No. 1785, University of Houston.

41. K. M. Marshek. 1976. A comparison of the strength characteristics of Norton 150 HSWL 750 and Rexnord LF 821 conveyor chain. Mechanical Engineering Dept. Rep. No. 2076, University of Houston.

42. K. M. Marshek. 1977. Worm-gear speed reducer program summary. Mechanical Engineering Dept. Rep. No. 2100, University of Houston.

43. R. S. Sodhi and K. M. Marshek. 1977. The dynamic load rating capacity of ball bearings with steel balls and plastic races. Mechanical Engineering Dept. Rep. No. 2105, University of Houston.

44. K. M. Marshek. 1977. Chain wrap strength of super tough nylon sprockets. Mechanical Engineering Dept. Rep. No. 2106, University of Houston.

45. R. S. Sodhi and K. M. Marshek. 1977. Stress analysis of modular belting module. Mechanical Engineering Department Rep. No. 2108, University of Houston.

46. R. S. Sodhi and K. M. Marshek. 1977. The strength of modular belting modules. Mechanical Engineering Dept. Rep. No. 2109, University of Houston.

47. R. S. Sodhi and K. M. Marshek. 1977. Effect of elevated temperature on modular belting strength. Mechanical Engineering Dept. Rep. No. 2110, University of Houston.

48. R. S. Sodhi and K. M. Marshek. 1977. Strength of assembled honeycomb belting. Mechanical Engineering Dept. Rep. No. 2111, University of Houston.

49. K. M. Marshek and R. S. Sodhi. 1977. Modular belting tensile failures and remedies. Mechanical Engineering Dept. Rep. No. 2112, University of Houston.

50. R. S. Sodhi and K. M. Marshek. 1977. The experimental determination of plastic strain in belting modules. Mechanical Engineering Dept. Rep. No. 2113, University of Houston.

51. K. M. Marshek. 1978. Load distribution in modular belting reinforced with steel links. Mechanical Engineering Dept. Rep. No. 2115, University of Houston.

52. K. M. Marshek. 1978. Optimum modular belting sprocket diameters. Mechanical Engineering Dept. Rep. No. 2410, University of Houston.

53. K. M. Marshek. 1978. Optimum modular belting sprocket spacing. Mechanical Engineering Dept. Rep. No. 2418, University of Houston.

54. L. S. Gremminger and K. M. Marshek. 1978. Winch drum design analysis. Mechanical Engineering Dept. Rep. No. 2450, University of Houston.

55. M. Naji and K. M. Marshek. 1978. Pressure distribution in a circular cylinder rotating about its axis which is horizontal. Mechanical Engineering Dept. Rep. No. 2480, University of Houston.

56. K. M. Marshek and M. Naji. 1978. Rotor-filter pump cover plate bolt tensile stress due to hydraulic pressure. Mechanical Engineering Dept. Rep. No. 2481, University of Houston.

57. M. Naji and K. M. Marshek. 1978. Stresses in a rotating disk due only to angular rotation. Mechanical Engineering Dept. Rep. No. 2482, University of Houston.

58. K. M. Marshek and M. Naji. 1978. Rotor filter pump pitot tube fluid force caused by steady flow through the right angle bend of the pick-up tube. Mechanical Engineering Dept. Rep. No. 2483, University of Houston.

59. K. M. Marshek. 1977. Gear train strength and wear design evaluation. Rep. No. B326, University of Houston.

60. K. M. Marshek. 1978. The hardness of RCS actuator gears. Rep. No. B379, University of Houston.

61. K. M. Marshek. 1978. Maximum torque speed curves of stepper motors and drivers. Rep. No. B382, University of Houston.

62. K. M. Marshek. 1978. The hardness of Bettis actuator gears. Rep. No. B383, University of Houston.

63. K. M. Marshek. 1978. Gear wear in a Bettis reducer having nonheat treated pinions. Rep. No. B391, University of Houston.

64. K. M. Marshek. 1978. Gear wear in a Bettis reducer having gas nitrided pinions. Rep. No. B396, University of Houston.

65. K. M. Marshek. 1978. Bettis reducer gear train efficiency. Rep. No. B399, University of Houston.

66. K. M. Marshek. 1979. Chain wrap strength of nylatron sprockets. Mechanical Engineering Dept. Rep. No. 4101, University of Houston.

67. G. C. Andries and K. M. Marshek. 1980. An experimental study of kinetic friction for hardened dry steel pairs. Mechanical Engineering Dept. Rep. No. 4109, University of Houston.

68. M. O. Ross and K. M. Marshek. 1980. Comparative evaluation of plastic and steel sprockets operating with steel chains. Mechanical Engineering Dept. Rep. No. 4158, University of Houston.

70. M. O. Ross and K. M. Marshek. 1980. Scanning electron microscopy study of fatigued sprocket teeth. Mechanical Engineering Dept. Rep. No. 4159, University of Houston.

71. J. Richichi and K. M. Marshek. 1981. Effect of oil additives on worm gear speed reducer efficiency. Mechanical Engineering Dept. Rep. No. 4505, University of Houston.

72. K. M. Marshek, et al. 1985. Experimental investigation of truck tire inflation pressure on pavement-tire contact area and pressure distribution. Texas State Department of Highways and Public Transportation Research Report Number 386-1.

73. K. M. Marshek, et al. 1985. Effect of truck tire inflation pressure and axle load on pavement performance. Texas State Department of Highways and Public Transportation Research Report Number 368-2F.

74. K. M. Marshek, et al. 1986. An experimental and analytical investigation of mower-thrown-object phenomena. Texas State Department of Highways and Public Transportation Research Report Number 445-1.

75. K. M. Marshek, et al. 1986. Study and recommendations for the reduction of mower-thrown-object accidents. Texas State Department of Highways and Public Transportation Research Report Number 445-2F.

76. S. M. Kannapan and K. M. Marshek. 1987. A Parametric Approach to Machine and Machine Element Design. Mechanical Systems and Design Technical Report 198, The University of Texas at Austin.

77. S. M. Kannapan and K. M. Marshek. 1987. Design Methodologies: A New Perspective on Approaches and Tasks. Mechanical Systems and Design Technical Report 201, The University of Texas at Austin.

78. S. M. Kannapan and K. M. Marshek. 1987. Design Synthetic Reasoning: A Program for Research. Mechanical Systems and Design Technical Report 202, The University of Texas at Austin.

79. S. M. Kannapan and K. M. Marshek. 1988. Engineering Design Research: A New Perspective. Mechanical Systems and Design Technical Report 205, The University of Texas at Austin.

80. S. M. Kannapan and K. M. Marshek. 1989. An Algebraic and Predicate Logic Approach to Representation and Reasoning in Machine Design. Mechanical Systems and Design Technical Report 212, The University of Texas at Austin.

81. S. M. Kannapan, K. M. Marshek and G. Gerbert. 1989. An Approach to Nomenclature and Classification for Mechanical Transmissions. Mechanical Systems and Design Technical Report 214, The University of Texas at Austin.

82. S. M. Kannapan and K. M. Marshek. 1989. Design Synthetic Reasoning. Mechanical Systems and Design Technical Report 216, The University of Texas at Austin.

83. Istre, M.R., and Marshek, K.M., "An Evaluation of Highway Mowing Procedures for the Reduction of Mower Thrown Object Accidents", Research Report No. 1441-F, Center for Transportation Research, The University of Texas at Austin, Austin, Texas, 1994.

84. K. M. Marshek, et al. 1994. The Technical, Engineering and Economic Feasibility of a High-Speed Ground Corridor, Research Report No. TX 2020, Center for Transportation Research, The University of Texas at Austin, Austin, Texas.

85. N. H. Sledge and K. M. Marshek. 1996. Vehicle Yaw Marks -- A Review. Mechanical Systems and Design Technical Report 305, The University of Texas at Austin.

86. N. H. Sledge and K. M. Marshek. 1996. Vehicle Critical Speed Formula -- Values for Coefficient of Friction -- A Review. Mechanical Systems and Design Technical Report 303, The University of Texas at Austin.

87. N. H. Sledge and K. M. Marshek. 1996. Formulas for Estimating Vehicle Critical Speed From Yaw Marks -- A Review. Mechanical Systems and Design Technical Report 304, The University of Texas at Austin.

88. N. H. Sledge and K. M. Marshek. 1996. Vehicle Critical Speed Formula -- Determining the Radius of Curvature -- A Review. Mechanical Systems and Design Technical Report 302, The University of Texas at Austin.

89. N. H. Sledge and K. M. Marshek. 1996. Vehicle Critical Speed Formula -- Measuring Superelevation -- A Review. Mechanical Systems and Design Technical Report 301, The University of Texas at Austin.

90. K. M. Marshek and N. H. Sledge. 1996. The Science of Scale Modeling for Vehicle Dynamics. Mechanical Systems and Design Technical Report 327, The University of Texas at Austin.

91. N. H. Sledge and K. M. Marshek. 1996. Vehicle Trajectories for the Analysis of Lane Change Maneuvers . Mechanical Systems and Design Technical Report 307, The University of Texas at Austin.

92. N. H. Sledge and K. M. Marshek. 1996. Comparison of Ideal Vehicle Lane-Change Trajectories. Mechanical Systems and Design Technical Report 308A, The University of Texas at Austin.

[ UT | Home| Biosketch | Teaching | Research | Experience ]
[ Honors Publications | Dissertations | Miscellaneous ]

kmarshek@mail.utexas.edu